Fitted Face Mask Pattern for Glasses
Design should always be about necessity! ‘And that is my purpose here; to fill a need for so many frustrated people who wear glasses and want a good mask pattern. My Fitted Face Mask Pattern for Glasses comes to the rescue…
The Unique Nose Piece:
Oh dear! I am appalled at the way people wear their masks, so each shopping trip is like research. I’m seeing commercial ones but have still not seen that many that look like they are really comfortable or fit well. Maybe that is why there are so many ‘un-masked’ rebels! Fogging glasses and touching mouth are very common complaints.
I know the ‘Olsen style’ mask is very popular and my first design has had great reviews and mass amounts of downloads. The problem would arise when there was just too many layers at the centre seam and that would push glasses up or out, which would affect visibility. To remedy that I removed the centre seam AND the top edge seam to make a single piece for the nose in this fitted mask pattern for glasses. Also, even better; it has a super flat aluminum nose piece ironed inside to make it super flat and adjustable!
To make this Mask:
Download & Print the Pattern. Cut one nose piece, 2 lining and 2 outer pieces. (you can add layers/filter pocket as you like) Fold and press the nose piece in half.
You can also watch it in video form: (please subscribe, so that I will continue making videos)
Make you own Metal Nose Pieces:
Check out my video & instructions to see how to make these nose pieces. Trust me, it’s easy.
They are made with fusible web so they can now be ironed into place and stay there. Place it next to the centre fold.
Fold over the fabric and make sure the metal piece stays centred. It should be at least 3/8″ away from edge.
Use some parchment paper to protect the iron from any possible contact with the fusible webbing. (don’t ask me how I know that!)
Ta-da! You now have a ready to use nose piece. It is bendable and very slim. Yes it is only 2 layers but if you desire you could do more and use more fusible webbing as well.
I have found that breathability is making the decisions for mask fabric choices… but that’s a whole other discussion. Do make your own decisions.
Cut 2 of lining and 2 of the outside fabric. I have decided on a polyester knit here.
Since the nose piece is not flat, clip at the markings on the top edge.
Sew the front centre 3/8″ seams of both the lining and outer fabric
Fold open the centre seam and flatten with top stitching (zigzag or mending zigzag work well)
Top stitch a line slightly over from the centre seam and there is the opportunity to put a stiffener in this channel. Zip-ties or pipe cleaners work well and prevent the mask from collapsing at each breath.
Centre the nose piece on the top seam (right sides together) and sew seam, spreading at clips to flatten nicely.
Repeat by adding the lining piece and sewing seam.
Insert Optional Stiffener:
Push the zip-tie (or pipe cleaner) into the channel and cut at appropriate length and stitch closed. This will help keep the mask off your face. I do not particularly like having something touch my lips, just saying.
Trim excess seam allowance to make as flat as possible.
Right Sides Out- Fitted Mask for Glasses:
Turn right sides out (ends are still open) and top stitch close to edge to keep flat and in place.
Fold over ends to make casings for the straps.
Zigzag or straight stitch depending on how much the fabric frays. I prefer to use some cut strips of spandex-mix t-shirt (like camisoles) to make soft easy-stretch straps/ties. They can be looped around as one long tie or just behind the ears. This is better than permanent elastic.
Extra Stability:
Another thing that makes for a better fit of this Fitted Mask for Glasses is that all the layers stay together. I know, you do not want to stitch and makes holes through the fabric, but it can really help keep it more comfortable, off the face so that makes breathing easier since it allows more surface area to bring in air. (You decide) I like to stitch through the layers to keep the lining stable. You can stitch through the front centre and/or across the width.
The nose piece set in this way allows for better angle and is much less bulk than having a top seam. Keeping as much stability at the front seam also makes it less likely to keep suctioning to the face.
I know I have the other styles like The Ultimate Face Mask & The DIY N95 Style face mask but they also have edge seams at the nose or do not ‘scoop’ lower over the cheek. Small differences in this Fitted Mask for Glasses can mean a lot… (think about the fit of your pants – we all have a favourite)
Whatever you do, please keep yourselves and loved ones safe. We do ths for ourselves AND others!
Really nice! I will try it without any plastic attachments and cotton material only, so it is more eco friendly. Thank you very much.
Great! Go for it!
I am so excited to try this pattern. I have done many different ones but they don’t work well. The problem I am having is getting it to print. I have tried several times. Could you please advise me or send it to my email I know how to print from that. Thank you so much!,
It is a PDF, have you saved it and use your print software. Do not size, just print as 100%. Hope that helps!
Good mask ideas for a four year old ??
I’d measure their face height and width and then compare to pattern. Divide the desired length by the large length = __% (should be less than 100). Print at that percent. Good luck
Hi Barb,
How can I add a pocket for a filter? How would I make a pattern for the filter?
Thank you for your wonderful patterns.
You could leave one end open next to the casing for the tie. I would think you can just use a flat filter, it will fold where it needs to when inserted. The more you restrict the air flow, the more chance it will find any place to escape; hence get near glasses.
I made a long buttonhole on each end of the lining piece about 1 1/2 inches from the end. I then made one new pattern piece about 1/2 inch smaller all around cut to fit inside. Can use a surgical mask it HEPA filter inside.
I don’t sew… how can I get one of these! I’m desperate and have spent what seems like hundreds of dollars in masks and accessories to find one that works with glasses and to no avail 🙁 My work has not shut down and I need some bad! Please help!
I hold another job as well, and am insanely busy. The are probably some local people making and selling, suggest they use the pattern… Good luck
Melania, I have made masks in MANY patterns to see which one fits best. (I’m retired and do this strictly for fun) There are benefits to both the 3D mask and the Olson mask, but still not perfect. I was thinking how to combine the two and today found Barb’s pattern. I haven’t tried it yet but it is exactly what I envisaged. If you take her pattern and instruction to a sewing friend, he\she would be SO happy to have a great pattern. If you don’t have a sewing friend, ask at your local fabric shop and they may be able to help. Or put an ad on kijiji.
Thanks! Great ideas!
I’m having issues trying to print out pattern could you email me the PDF?
done!
Thanks so much for sharing your pattern! I’ve been looking for this type of mask, so was very excited to find yours 🙂 I’m off to watch the video and hopefully I can pull this off! Thanks again!!
If you are not that sure, make a test one… But pretty basic.
I’m away from my printer. Would you please be so kind to send the pdf to me, please? When I get back I will be able to download and sew for several family members. They will appreciate these greatly!!
Thank you so much!
Aren’t your family lucky!
Hi Barb, having a lot of trouble downloading this, would so appreciate if you could email the PDF. I am thrilled with finding this from you. Thank you so much for sharing.
Kind regards, Vicki
Stay safe and see clearly! 😷
Thank you for this pattern. I made it as soon as I saw it. I love the way it fits under my glasses and the zip tie has yet another worthy use. No more fog and I am not inhaling fabric! I will be making more for friends with glasses..
Awesome! one mask at a time!
I am also unable to download the pattern and would love one. I have such a problem with my glasses steaming up every time I wear a mask! And everyone in our family wears glasses, so this will help. thank you
Sent! I hope it helps!