DIY Concrete Witch Ghoul

It’s almost halloween again and I have been enjoying my Spook so much over the last year that I just had to give him a friend… a Girl friend! This sweet witch is just as easy to make and also sits perfectly on a step or a tree stump. She sports a awesome hairdo and perfect boots! Let me show you how to make your own DIY Concrete Witch Ghoul!

DIY Concrete Witch Ghoul Body Supplies:

  • 2 balloons
  • 2 litre Soda Bottle
  • Masking & Duct tape
  • Yarn, rope, cording, or mop head & scissors
  • tongue suppressors or paint sticks
  • wire
  • tin foil
  • paper towel
  • styrofoam tray
  • Fabric that has some absorbency (I used velour)
  • Cheesecloth or large mesh fabric (halloween mesh)
  • Cardboard
  • Quikrete Portland Cement (mixing tools/container/utensil, water, gloves/mask )
  • Optional acrylic paint

Step #1: The body

To make things easier later on I have used a double layer of balloon for the head this time. Put one balloon inside the other and blow them up together. It may be a bit more difficult but you don’t need it very large. I used 2 so that I was assured of no bursting…(don’t ask how I know this)

The beauty of using the bottle for the torso is that it is easily cut later and it can be filled to provide a nice stable weight. Tape the sticks or tongue suppressors across the back and the balloons at the front of the bottle. I know she does not have the best posture but she looks comfortable.

Every witch needs a hat! Don’t be too fussy as it will be covered later on. Make a brim out of cardboard, and then roll a cone until it fits as you like. Tape it securely and then cut to fit the brim.

To make some arms use whatever wire you have on hand. This is covered copper wire but you could use coat hangers as well. Tape it to the shoulders. To add some ‘bulk’ (muscles) wrap some plastic bags around it. Tape the bottle to the styrofoam and add some ‘flair’ out the back with some tape.

She needs skinny little witch legs and some boots. Again using wire, add the shape by forming with tin foil. Some pointy toes and little heels were in order. Make a couple long rectangle boxes for her 2 legs/thighs and tape the wire legs to them.

Step #2: The Hair

She needs great hair! I wanted some curls so I untwisted a cording that I had on hand (reason to keep practically everything) but you could also use rope, or even a mop head. It should have some fibre for the concrete to absorb into.

I made a ring of ‘hair’ to go around her head (under her hat) that included her bangs and long sides.

Be creative, and imagine it with the draping…

Step #3: The Fabric

I like to do a test-drape to make sure I have the right amount of fabric. One rectangle for each leg and one large rectangle for the sleeves and back coat. If there is extra it is easily tucked underneath.

Step #4: The Cement Work

The Spook has held up really well to all the temperature changes here in Canada so I have used the same mix on this. It is Quikrete portland cement. If you are new to concrete you may start here.

Mix Portland cement and water to a slurry that is somewhat like melted ice cream. Set your armature Witch on a step and cover it to protect from the concrete.

Start with the feet and legs. To cover the boots I used the slurry concrete like paper-maché.

Rip small pieces and layer the feet/boots and smooth it out. Give it a few layers and roll some paper towel for the ankles. They can remain quite thin

Dampen the fabric before dipping into the slurry, as then it will not suck out all the moisture from the concrete. Work it well into the concrete so that the fibres absorb enough concrete.

Drape each leg over the thighs first. Fold over a bit at the bottom, and tuck any extra under at the sides.

Then use the large rectangle and drape it over the shoulders tile it meets the floor at the back and around the front arms. Play with the folds and how the sleeves rest on the legs. A brush helps smooth the cement.

The hair was a bit tricky as it was somewhat fragile in the mix. Some strands needed to be reattached. Perhaps a mop-head would be perfect! It’s like playing with mud…

I dipped a coarse mesh fabric (sold for halloween decor) into the slurry as well and wrapped it over the hat when in place. Brush extra cement on to give it a good coverage. It creates great texture and absorbs the concrete well.

It comes together quite quickly with the cement. You can fuss with the hair, and add cement to keep the strands in place.

Step #5 The Finishing

After the cement cured over a couple days I pulled out the bottle and popped the balloon. Pull out any pieces like tape and cardboard. The cemented fabric should be stiff enough.

I then added another brushed layer for good measure. It probably didn’t need it. I included a bit of acrylic paint into the thin concrete ‘paint’. I tend to be a bit fussy with finishes… my bad.

Misting it with water slows the setting which does help to add strength.

I couldn’t help but smile as she was coming together… Such a cool DIY concrete witch Ghoul! Her weight lets her sit well in a step or stump.

Since she is hollow, you can add some light. (battery or solar operated are the easiest) Make her a broom stick in case she needs it…

She will keep an eye out for any wayward spooks…

The best thing… you don’t need to sculpt a face. You just have to use your imagination to ‘see’ a face.

They make the best pair; perfect for halloween. I think I can hear them whispering… I know you want one of your own DIY Concrete Witch Ghouls or Concrete Step Spook or The Cat

(Intended for personal use only: Publishing of this design is prohibited without permission)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.


  1. Im in love with this Barb..she’s just gorgeous! Im gonna make this asap. Thanku so much for sharing this project…Im gonna make the goul too 😆

  2. I made yours book and it came out really well. Will post a picture of it. You didn’t drape the switch and plastic like you did the other one before adding the concrete? Is this needed? Also how do you keep the hat on top of the hair? Also do you remove the cardboard from the hat when she’s dry?

    1. So many questions… Yes, you are quite observant! I did not put the plastic, and did not really miss it. Anything that is plasticy will not have concrete adhere. The hat sits in the concrete and possibly some added slurry keeps it attached. Yes, The cardboard stays in the hat, and its fine since it is encased. You would like her new friend the Cat Ghoul

  3. Amazing!!! I am so happy to have stumbled on your website.
    I am in love with this project. This is so faboulous.

  4. WOW! Just wow! Well first off I hardly of ever read the commentary of a “how to”pin. But this I just had too I love your art an your explanation of “how to’s” I just am diving in an can’t stop looking at all your amazing creations! Kudos an major praise for them! Keep up the amazing work! Your a tru blu artiste! Love love love it! Thx for sharing !! XX. Lisa

    1. Wow Lisa, I just love feeling your enthusiasm! I do get excited when I am dreaming up new ideas AND when I am making! I guess it am an ‘art therapist’ without really knowing what that was as of late… stay tuned as much still to come…

    1. If there is a steel rod or armature it could be wrapped with concrete soaked fabric. I did that for my cat ghoul and it worked well. If you needed extra forming the Rapidset Cemetall does have some workability like clay. I used it to sculpt this Good luck

  5. Hi Barb. Beautiful work! I do have some questions though. Does the cardboard all stay in? Are the legs open underneath? I am trying to figure out a way to make this without leaving any cardboard, tongue depressor or bags/tape inside.


    1. I am not sure if a few tads are left. Her feet are encased so they are fine. The ‘stuff’ in the legs can be pulled out from underneath. She has sat out all year for a couple winters now with no problems. If you encase any of the bits in plastic they will pull out easier and especially if they are pliable somehow.

  6. Thank you so very much for posting the directions for making the spook he is so characterful and I am definitely going to try to make one, could I ask you how you make concrete stick to styrofoam like the mask that you make I find it crumbles off and also how to make it stick to a plastic mannequin head that I also plan the cover in concrete. Please keep posting your site is truly amazing thank you 🙂

    1. When I made the mask I used the concrete just to sculpt the face on the styrofoam and then made a mold from it. If you are wanting to cover something that is more ‘plasticy’ it would be best to give the concrete something to grab onto like mesh, or chickenwire or even wrap in cement dipped fabric. Have you see my Faux Bois chair? It has some of that in the making of the form. Just don’t use things that will absorb when wet and expand as then it will freeze and crack everything. Happy making!

  7. Greetings from Swaziland. I love your concrete witches. Would it be possible to send me a tutorial video as I would love to make one. Warm Regards Isabel